Granny

При работе с гранулами довольно легко создавать статические звуки. Чтобы сделать их звучание более интересным, в Granny встроен LFO, который может модулировать определенные параметры, выделенные зеленым текстом. Либо щелкните текст МОДУЛЯЦИИ, либо удерживайте клавишу Shift, чтобы настроить величину. Нажав ПАРАМЕТРЫ, вы вернетесь в режим по умолчанию или просто отпустите кнопку Shift.

ДИСПЛЕЙ ВОЛНОВОЙ ФОРМЫ

Перетащите сюда любой звук из библиотеки, чтобы импортировать сэмплы. Желтые стрелки определяют начальное и конечное положение области петли, откуда берутся гранулы.

SAMPLE OSC

POSTITION
Определите начальную позицию в петле.

OFFSET
Creates a stereo widening effect by offsetting either right or left channel.

SPEED
Sets speed and direction of how the position progresses through the sample.

GRAIN OSC

DURATION
Increases the grain period. The shorter the grains the pitch of the grains change to the frequency of which the grains repeat. The longer the grains the pitch changes more to the original sample pitch.

KEYFOL
Key follow determines how the duration changes according to what note you are playing.

PITCH R
Pitch Random sets the range of which the grains pitches are randomized.

LENGTH
Shortens the length of the grain but not its duration.

SHAPE
Selects the type of shape for the grain.

AMP OSC

LEVEL
Adjust overall output from the grain oscillator. Increasing number of grains naturally raises the output which can be compensated by lowering the level. Alternatively, if you have selected a very quiet portion of the sample you can raise the level to compensate for that.

GAIN
Adjust the output level of grains fetched from quieter parts of the sample. By doing so you can lose the natural dynamics of the original sample.

WIDTH
Narrows the stereo width.

STREAM OSC

COUNT
Sets the number of grain streams.

POSITION
Sets the start position within the streams.

DURATION
Sets the duration of the streams.

PITCH
Adjust the pitch of the streams.

PITCH SECTION

OCTAVE
Adjust the pitch in octaves.

COARSE
Adjust the pitch in semitones.

FINE
Adjust the pitch in cents.

FORMANT
Changes the pitch of the original sample.

FILTER SECTION

ADSR
Adjusts Attack, Decay, Sustain and Release of the filter Envelope. To activate and set the amount click MODULATIONS or hold down Shift and the click and drag FREQ knob.

FREQ
In PARAMETERS mode this works as a simple lowpass filter, in MODULATION mode it sets Envelope amount.

RESO
Emphasizes the frequencies around the cutoff point.

AMP SECTION

ADSR
Adjusts Attack, Decay, Sustain and Release of the Amplitude Envelope.

VOLUME
Adjust overall output level.